Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
239 Posts
Discussion Starter · #1 ·
I have done option B few years ago. worked for a while but keep coming back.
Now I have the 3 Amigos and the Brake light on Permanently. Can't erase with USB Amigo or other scanner. Time to time the Pump will come on for no reason while driving but does not do anything.

I went ahead and bought a used pump. Do not know if that is any good. But I am willing put in to see what happens. Any advise how to swap and bleed the Pump?

Current fault code is

1.--Current Faults---->
Active Faults:
012:pump fail monitor line
Logged Faults:
012:pump fail monitor line

Here is the explanation -
http://www.rswsolutions.com/index.php/discovery-ii-abs-codes/63-012pump-fail-monitor-line


__________________
2001 Discovery II, BMW Z4, BMW E60
 

·
Premium Member
Joined
·
1,737 Posts
After you refilled the system first pedal bleed it in the right sequence(from the shortest to longest line) then if you have tester power bleed it or if not find a hill and make the HDC work hard then pedal bleed again and top up reservoir ...it will bleed itself this way
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top