Land Rover and Range Rover Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
16,548 Posts
Nearly right.
Use distilled water, not tap water, only let it idle for a minute between drains and use 100% coolant and distilled water when finishing.
It it were mine, I would also install a new 180 degree t/stat and a new pressure cap at the same time.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top