Land Rover and Range Rover Forum banner
1 - 3 of 3 Posts

· ashr
Joined
·
32 Posts
Discussion Starter · #1 ·
I've seen a number of threads where folks talk about blowing out the line from the Radiator to the Expansion tank in case it might be clogged. How does one go about doing this?
 

· Premium Member
Joined
·
7,890 Posts
I would guess a quick blast of compressed air, or just blowing through it with your lungs.
 

· Administrator
Joined
·
2,424 Posts
Running the engine at idle from cold with the rad cap off you should see a constant steady stream flowing into the expansion tank from that hose. If you do not it may be clogged.
If you want to blow it out to ensure it is clear, disconnect it at the drivers side top corner of the radiator and blow through it.
Hope that explaines it
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top