Land Rover and Range Rover Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Have 1996 Dico II problem with brake lights not coming on when brake light depressed. I check all fuses - test OK. There are 2 plunger switches by the brake peddle ( large rectangular one, smaller round one ) which of these is for the break lights or are both? Help no manuals.
 

·
Premium Member
Joined
·
16,594 Posts
I think it is the larger plud, you should test both and see if you get a signal when the pedal is depressed.
Mike J
 

·
Premium Member
Joined
·
1,033 Posts
Push in all your connectors....

:wave: Howdy!

I had a nonworking left reverse light I had to work on. The filament was blown , replaced the bulb but I had also found the Molexpower connector had worked its way out. A good push , and the connector snapped back in place and all was working.

On eBay, there are plenty of folks selling the service manuals for the LandRovers for cheap,if you have a laptop or Windows computer.
 
1 - 4 of 4 Posts
Top