Land Rover and Range Rover Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
342 Posts
Discussion Starter #1
just replaced a couple of brake lines- 1990 RRC
did the 14 step rover bleed technique

now get a soft pedal- goes about 30% down before really engaging.
let up, then press down and it is solid- like before.

any thoughts besides having the brakes professionally bled?

Thanks,
Rob
 

·
Registered
Joined
·
638 Posts
first id check ads pump if you have one...where the line goes into the pump from the resavor,,, crud can block at the abs inake....mine did when brake line busted and drained.... but i like the one man bleed ... use a large brake fluid container and use a vacume line to hook to the bleed screw.. when it is open and end of vacume line is in the brake fluid it will allow air to go out and suck fluid back in..when ya pump brakes...works for me...
best of luck...mike
 
1 - 2 of 2 Posts
Top