Hello. you can find the instructions on the user manual.
But as far as I remember, it´s put the Key on the ignition, go to position II to power the truck, switch on the rear wiper and when it´s running switch off the key, it will stop on the moment, and dont goes back to the top.
When you put the key on the ignition and turn to position II, it shold back to top and normal position again.
I WOULD LOVE TO KNOW HOW THIS WORKS!!!! i have tried turning the car off about 10 times while the wiper was in motion but it keeps going back to the top....i even tried it with the car running. I am about to lose my mind
Set the rear screen wiper operating, then open
the upper tailgate when the wiper is in a
near-vertical position. The wiper will stop as
soon as the tailgate is opened.
then you got to turn the wiper off so you can close the tailgate to remove the wiper
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.