Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
16,548 Posts
Mark,
If you look on the opposite end from the key where the loop is you will see a little notch that can be pried open with a very small flat scre driver. Start ther and then as it starts to open runs a thin blade around the seam and it will pop open.
Good luck,
Mike J,
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top