Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

322 Posts
Discussion Starter · #1 ·
Ok, I'm getting ready to change my water pump which as obviously failed and I'll change out my thermostat and fan clutch while I'm in there per Mike's recommendations.

Question is, will I get a proper drain of the old coolant while taking the water pump and thermostat off or is there something else I need to do. I know some take the garden hose and flush it out. But, this would be hard water. Is it necessary to flush the system at this point with water or do I install the new parts, fill with new coolant, bleed the system, and call it good?

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.