Land Rover and Range Rover Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
64 Posts
Discussion Starter · #1 ·
Is there an easy way to replace the fog lamps? like to just put in a new bulb or something I looked at it and it seems to be 1 peice I didnt take it out or anything but does it come apart some how to swap a new bulb in?

Thanks
 

· Registered
Joined
·
43 Posts
get under the truck and look to the sides of the fog lamp, you will see two set screws remove these and unhook the adjuster and then remove the whole unit, I forget how it comes apart but you need to seperate the housing from the lens to replace the H3 bulb, one of mine was not working so when I removed them from the truck it was not to replace them. most people remove the lamps and trim the front bumper end caps, better clearence in the front and looks better too -Andy
 

· Registered
Joined
·
64 Posts
Discussion Starter · #3 ·
You got a picture of that would like to see how its trimed.

Thanks
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top