Land Rover and Range Rover Forum banner
1 - 6 of 6 Posts

· Computer Nerd
Joined
·
802 Posts
Are you talking about sway bars or control arms? The mixed terms you've used are slightly confusing, just because BOTH are prone to have issues on an LR3.
 

· Registered
Joined
·
37 Posts
Discussion Starter · #3 ·
The sway arm bushings. The hold down saddle/strap that goes over the bushing was loose and causing a knock over sharp bumps. Tightened it down (and the knock went away) but can see that the bushing needs to be replaced.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top