Land Rover and Range Rover Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
dirtbag,

Had the same dilema a few weeks ago...replaced my intake manifold gasket cuz it was leaking and thought I could get away with using the old injector o-rings...big mistake, it was like a fuel fountain!

Anyways, got mine from this guy:

http://cgi.ebay.com/ebaymotors/ws/e...bay.com:80/?from=R40&satitle=7997495596&fvi=1

.38 cents a whack...good quality, fast shipping...get at least 18 so you can do the pressure regulator while the rail is off. Good luck.
 

·
Registered
Joined
·
128 Posts
Your neighborhhod BMW store should have some, about $3 each. NAPA also has them. They fit anything Bosch, which includes European imports, GM, Ford. I would be a bit leery of a 38 cent o-ring from ebay. Decent injector seals usually cost a buck or two. I buy them by the bag for about $1.30 each for genuine Bosch seals.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top