Land Rover and Range Rover Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
239 Posts
Discussion Starter · #1 ·
Over the weekend I managed to replace my Radiator, Fan with Clutch and Serpentine Belt. Flushed and put 50/50 coolant. I had to opening the Air filter housing, MAF. Since I opened up the Throttle Valve decided to spray and clean (may be i didn't clean enough)

Now the idle is running little high and fan is making little more noise (whoosh) than the stock fan I had before. Any explanation? It's the low speed issue on the hwy it seems ok.

Will appreciate any suggestion.

Thanks :confused
 

· '03 Disco SE
Joined
·
573 Posts
Did you clean out your idle air control valve? If you just sprayed carb cleaner into the TB you could have dislodged a piece of gunk that's now causing the IAC to stick. Pull the IAC and spray it with carb cleaner until you hear/see it spin freely. You'll be surprised by how dirty it is.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top