After $12,000 of storing this for 17 years, Im ready to let it go. Trans is out. It will fire up and run. Nice solid chassis, straight body. Awsome fabricated front bumper to match the stock one.
Located in Sullivan, Wi.
Oh yea RHD, its fun to back through Mc Donalds and the bank
A couple of weeks ago I got my grubby mits on another Forward Control to keep my 2A company! Its a 2B currently with a 2.6 petrol and is in very good nick having only 7945 genuine km on the clock. (If I've done things correctly you should see Rex in my avatar!)
I have a few simple questions before I get to serious about this purchase and I am hoping you guys can help me out. My main questions are do the standard series III parts work on the lightweights? Can I put an overdrive on? what electrical system is better to have, the 12v or 24v, and how can I...
Just looked at my output shaft and found out that the seal was gone. now I am putting it together and try to get the end float of the shaft. I have 2 shims in there and have lots of play, now what do I have to do to reduce the play take shims out or put shims in between speedo housing and...
There is a set of forged wheels for land rover,details as below:
construction: 3 piece forged wheel
front 22X11J ET48 PCD5X120 CB72.6 gunmetal
rear 22X11J ET38 PCD5X120 CB72.6 gunmetal