Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

·
2008 LR2 SE
Joined
·
68 Posts
In the US, the dealer will charge about $350-$400 for the key + programming.

Alternatively you can order an aftermarket fob ($30) and the Autel AP200 OBDII scanner ($60) and program the key yourself. If you want to try that, read this thread first...


In my experience, the AP200 works but the software can be confusing. Also the next time you need a key you'll only need to buy the key. And you may find the other scanner functions useful.
 

·
2008 LR2 SE
Joined
·
68 Posts
I was recently able to program an X Autohaus key using an AP200. Discussion in the link below. The software was a little tricky and did not indicate success. But even though the software said it failed, the new key actually worked. Basically keep trying and testing the new key after each attempt. Used keys or any key which has been programmed before will not work...


 
1 - 2 of 2 Posts
Top