Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 2011 Range Rover (L322)

Has anyone ever installed longer wheel studs in their wheel hub?

I have a set of wheels I am installing and I am not getting enough turns on the lug nut for it to be safe. Only getting 5 full turns and I need at least 8 full turns at a minimum. Therefore I need to install extended wheel studs to get those extra turns.

Has anyone done this and if you can you recommend a reputable vendor from which to order?

Thank you.
 

·
Registered
Joined
·
1 Posts
I have a 2011 Range Rover (L322)

Has anyone ever installed longer wheel studs in their wheel hub?

I have a set of wheels I am installing and I am not getting enough turns on the lug nut for it to be safe. Only getting 5 full turns and I need at least 8 full turns at a minimum. Therefore I need to install extended wheel studs to get those extra turns.

Has anyone done this and if you can you recommend a reputable vendor from which to order?

Thank you.
Hi, I also have a 2011 L322 Supercharged. Did you ever figure this out? I need longer studs too to fit spacers.

Thanks
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top