Land Rover and Range Rover Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
I'm looking for either a part# and/or a source for the plastic screw retainers that the carpet finisher is screwed into, (DII). I couldn't find anything in RAVE, or other searches. I need about a dozen of them.

Thanks
 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter #4
After coming up short at 3 different auto parts stores and 3 different hardware stores, and all the usual online sites, I finally did find a part number on these, RTC3746.

SILL LOCKUT NUT GROMMETS RRC/DIS > Carpets & Finishers > Interior Trim > Discovery 1 - 1989 to 1999 > Discovery > Main Menu > Home > Britcar (UK) Ltd

However, I never found a source that I would consider reasonably priced, or without having to float them over the ocean, ($5 for a single one at the dealer). I did find some license plate mounts that would fit the square hole, but all of those mounted flush, so I would have had to come up with some sort of spacer to make up for the height difference.

After looking around online further, I came across these:

Subaru Screw Grommet 94081-FA010

They spec out really close to what I measured mine to be, and the price is quite a bit more reasonable, so hopefully when they come in I can try them out and I'll let you know.
 
1 - 4 of 4 Posts
Top