Land Rover and Range Rover Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
My 93 front seats have some issues. The passenger side lumbar and tilt work but not the front to back. The drivers seat doesn't work at all. I pulled the drivers control box apart and it just fell to pieces. I don't need the programmable positions....I just want to be able to control the positions of the seat. I looked up replacement seat controls and they are very expensive. Has anyone on here recreated the seat controls using a few momentary switches for each seat?
 

·
Registered
Joined
·
21 Posts
Yes - I have done precisely what you need having given up the attempt to repair the ECU and the switch pack. I have all the details in a DOCX file that can't be posted here. Send me your direct email address and I'll forward it to you, Meanwhile, here is a picture of the new switch box

Alan

([email protected])
 

Attachments

·
Registered
Joined
·
589 Posts
If your looking for a less expensive
Seat control replacement
Go look for a discovery 1 at a junk yard
You can use those controllers
I have them in my 92
 

·
Registered
Joined
·
589 Posts
I also like Alan’s inventive controller
Sometimes you just got to think outside the box
You are only limited by you imagination
 
1 - 6 of 6 Posts
Top