Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

·
1993 range rover lwb - Roman Bronze
Joined
·
533 Posts
Discussion Starter · #1 ·
How are you? I have an issue.... I mistakenly drained my battery, then I got a jumpstart and drove the rover to test it out and have the alternator charge it and it performed flawlessly. I drove it for about 5 miles each way and then parked it. I then shut if off and tried to start it back up and this is what hapened:
http://youtu.be/NuJyUvXg7CE
Can anyone help me with this issue....
 

·
1993 range rover lwb - Roman Bronze
Joined
·
533 Posts
Discussion Starter · #3 ·
That's interesting that you said something regarding the computer. I have taken the old battery and purchased an optima red top battery with a 800CCA. I installed it and it still did the same thing. In the case I accidently reset the computer, is there anything else I can do. Here is what I've done since install in the new battery:

1. Take off the MAF, start truck: same thing. Reconnect back.

2. Took off the TPS, start the rover, same issue...reconnect

3. Took both battery leads off for 10 mins, same issue, reconnect

I'm now thinking the BECM may be damaged.

Even after I idle for a min and then put it in drive it will move forward a little and then die
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top