Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
102 Posts
Discussion Starter · #1 · (Edited)
RR4-1 front springs
RR1-2 rear springs

Spring measurements are 16 1/4" for the RR1-2's and 15 1/4" for the RR4-1's. The springs just have a tiny bit of surface rust on either end where they've been rubbing on the mounts. These don't have many miles on them, but they are about three years old (this truck sat for a while before I bought it). Shocks in the picture have already been sold.

$275 shipped, $225 delivered to your door if you live in the Atlanta area.

To decipher those spring #'s, check out this handy chart courtesy of RTE:

RR1-2 = 2" Coil 330/375 rate
RR1-3 = 3" Coil 330/375 rate
RR1-5 = 5" Coil 330/375 rate
RR2-2 = 2" Coil 189 rate
RR3-1 = 3" Coil 285/325 rate
RR3-2 = 3" Coil 285/325 rate
RR3-3 = 3" Coil 285/325 rate
RR4-1 = 2" Coil 225 rate
RR4-2 = 2" Coil 225 rate
RR4-3 = 3" Coil 245 rate
RR4-3P = 3" Progressive Coil 200/320 rate
RR4-5 = 5" Coil 255 rate

I don't check in here super often, so if you send a PM, just be patient please.
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top