Land Rover and Range Rover Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
Hi all, hope you are all well. Just recently purchased a second hand S3 109 bin, I would like to convert this into a trailer for extended camping trips, and to carry some loads around the farm. Has any body done this conversion, if so, I would be very grateful for any advice.
Thanks Kai
 

·
I'd love to be in the Rat Patrol
Joined
·
3,205 Posts
I wanted to do this with either a Disco or a Range Rover. The first concern was tongue weight.

I planned to cut the front back to the fire wall and use the rest as the cabin for a camper. I don't have many of the tools I'll need to do the cutting or welding so I am waiting for now.
 

·
Registered
Joined
·
14 Posts
I have done this with a IIa body , be carefull not to go too heavy with the trailer chassis I did mine out of 100mm x50mm rhs it is way too heavy
Brian
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top