Land Rover and Range Rover Forum banner
1 - 7 of 7 Posts

· Premium Member
Joined
·
1,768 Posts
It depends on the reason why it doesnt work... it needs investigation to identify where the trouble is cos it can be a wiring issue as the VSS(vehicle speed signal) to not reach the instrument pack or if it does the fault is within there and you'll need a replacement...is that the only fault you have? that's important to know cos that VSS genetrated by the SLABS ECU based on wheel speed sensors input is used by other systems too including engine management so it splits at a point
 

· Premium Member
Joined
·
1,768 Posts
In this case make sure that the ABS, TC and HDC warning ligts are working on ignition self test(all on for few seconds then off and stay so while driving), if these warnings are not visible go away or negociate the price down below... see attachment
 

Attachments

· Registered
Joined
·
4,797 Posts
Is this a vehicle you are considering purchasing?

A failed speedo on a DII is curious as I have yet to see such a thing.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top