Land Rover and Range Rover Forum banner
1 - 1 of 1 Posts

·
Computer Nerd
Joined
·
802 Posts
the battery is connected and fine; full charge; we have checked the forum everything they have mentioned isnt the problem so far. Grounds are all fine; ive hooked up a computer to it and reset the lights they are no longer on. Vehicle will try to start but not turn over. Were still struggling trying to get the thing running
What do you mean try to start but not turn over? The way most people use those words they mean the same thing.

The flashing m and s means the transmission computer has detected a problem. It could be something like the xyz switch is out of adjustment or bad. I've seen weirdness with the BCU cause the lights too. Checking the codes with a land rover specific code reader will tell you exactly what the computer thinks is wrong.


Sent from AutoGuide.com Free App
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top