Land Rover and Range Rover Forum banner
1 - 1 of 1 Posts

· certified idiot
694 Posts
Hi Heather - glad you got the torque converter in OK :smile

the shifter is held by a solenoid that will lock as soon as the lever is put into park. Generally using the battery and pressing the brake pedal will unlock it then you just push the button on the shifter and move it whilst your foot is on the brake pedal.
If you cannot do that pull the shifter cover and the solenoid is on the RHS at the base of the shifter. You should be able to push the pin on the solenoid back far enough to move the shifter - once it moves from park the pin is held in by a barrier so just move the shifter a few mm back towards neutral once the pin is disengaged and it will keep moving. the solenoid is item 4
here is the page from rave


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.