After setting the right pressure of 14.5psi all is fine until I reach 3500rpm pressure rises and then I get a missfire(i.e. cutting in and out) i've fixed the waste gate open and the boost still reaches 19psi
Any Ideas? do waste gates get blocked or go wrong?
I don't know what the max boost pressure is regulated to,but if there is a fault with the AAP sensor (on the side of the air filter box) or it's wiring,the boost will be limited to 1 bar(14.5 psi)
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.