Land Rover and Range Rover Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I'm trying to replace a trans and am to the point of apparently having to disconnect torque converter and took the inspection plate off an it looks like I need to take the oil pan off. Is that correct? I didn't see that in the manual. How am I supposed to get the TC bolts off? Please help so I can get something accomplished tonight.

Thanks everyone.
 

·
certified idiot
Joined
·
692 Posts
same way as you took it off, pull the plug out of the housing and undo the 4 bolts holding the TC to the drive plate, goes back the same way, rotate the engine with a prybar through the starter motor hole if you cant bump it over.
Cheers
Barri
 
1 - 3 of 3 Posts
Top