Land Rover and Range Rover Forum banner
Cancel
Create thread New Garage Forums

Running Board removal... a question..

Jump to Latest
4.4K views 5 replies 6 participants last post by  hhhill  
#1 ·
Going to remove the running boards from my '95 RRC LWB this weekend. I looked under there.. my question is this, there are brackets that attach to the frame/body from the boards.. do those come off the frame/body? Or do I leave them on and just remove the boards.. if anyone has some pics of the underside where the boards mount and you DON'T have running boards, can you please post.. I want to see if the brackets need to stay or come off.. I am thinking they need to come off.

Thanks!!!

Serg
 
#4 ·
I think there are 3 bolts that are shared with the transfer case mounts? Two have to be taken out, one just has to be loosened? It has been a while, but take your time!:wave:
 
Save
Reply Quote Like Like
D
#5 ·
yes was r 3 bolts (per side) on mine. 2 r vert. that stay w/ the running board and the hort. just take off the nut and then remove the r boards and then but the nut back on to the bolt and tighten (goes on the frame) once u do it u will see that u cannot take that bolt off. when i took my running boards off i used acouple of cement blocks on both sides to hold up the boards.
 
Land Rover and Range Rover Forum
posts
510K
members
75K
Since
2004
A forum community dedicated to all Land Rover owners and enthusiasts. Come join the discussion about modifications, troubleshooting, engine swaps, maintenance, and more!
Full Forum Listing
Explore Our Forums
Discovery Series II Range Rover Classic General Land Rover Discussion Discovery 3 / LR3 Land Rover Parts and Accessories